Getting Creative With Cooling Advice

Newberg Air Conditioning: DIY Maintenance Tips and Tricks for Your AC Keeping your air conditioning unit well-maintained will save you so much money on your electricity bill and cost on early replacement. According to HVAC experts, an AC requires regular attention to make sure that it is operating at its maximum efficiency and to prevent wear over time. The Heating, Ventilating, and Air-Conditioning or HVAC system is consisting ot either a furnace and AC or heat pump for cooling and heating, with interior components like evaporator and blower, and exterior components such as compressor and condenser coil. Allow us to provide you some tips and trick to maintain or take care of your whole-home AC or heat pump unit. The dangers of working with an appliance electrical system and its moving parts poses great risk to safety, so you have to turn off your AC power completely and unplug it from the power source or outlet. You can find an exterior shut-off near the AC, and turn off the power at the breaker box indoors. Next, remove the debris by removing the fan cage using a wrench or screwdriver to remove the fasteners and lift the fan grill or the cage away from the top of the unit, then use a vacuum to remove the debris from the interior. To clean the fins, use a strong stream from a garden hose and spray inside out to blast any dirt buildup between them, but avoid using pressure washer because it can damage the fins. Bent fins can affect the airflow and efficiency of your unit, so straighten bent fins with the use of a commercially available fin straightening tool or butter knife and be gentle so as not to damage the tubing embedded within the fins. Once you are done cleaning the interior, put back the fan cage, and cut back branches and other vegetation around on the outside condenser at least two feet in all directions, and rake back debris and leaves to ensure unobstructed airflow around the unit. A condenser that is out-of-level can cause wear and eventual unit failure, so check the level and use rot-resistant shims to level it. You need to remove foil duct tapes and unscrew bolts and screws to clean the evaporator coils, dust the coils using a soft brush, spray a commercially available no-rinse coil cleaner, drain drip into the pan, and clean the pan with soap, hot water, and bleach. It is also important to clean plugged evaporator using a wet/dry vacuum to clear any growing biological matter. Change the blower filter of your HVAC system once before the cooling season starts, and once before the heating season begins. For professional HVAC services, feel free to check our website or homepage.A Simple Plan For Investigating Options

A Simple Plan For Researching Options

Leave a Reply